Harold's RC Cars
JetsFonduFigured I try building a different type of r.c.10 snowblower. I used a Kyosho SR chassis fitted with one of my twin 540 motor conversion kits. 2-800kv brushless motors send power to the tracks. The aluminum drive sprockets are at the back. Custom aluminum wheels are wrapped with adhesive back rubber tape. This prevents the snow sticking to the wheels. Tracks are the stock Kyosho SR units. The plastic auger is from a chocolate fondu machine. The center gear housing lets ones auger spin in the opposite direction from the other. A small brushless motor is mated to a gear box and spins the augers. The augers feed the snow to 2 Dr Madthrust 40mm jet engines. A C.E. servo lifts the entire assembly. The body is for the stock Kyosho SR. A short video testing the jets. https://www.youtube.com/watch?v=aaekpgquM_0 |
