Harold's RC Cars

☰
    Home >

Maxtraction Ratrike

This started out as a spare parts build. I had a rc4wd worminator front axle left over from another project. The front suspension consists of 4 small springs mounted between the front axle and chassis, and a pair of shocks. The rear uses a single swing arm with a small spring. Aluminum front & rear wheels, front slicks and a tamiya sand scorcher rear tire.

  • Spektrum a5030 mini steering servo
  • Turnigy d2826 2200kv brushless outrunner
  • Exceed 35a brushless esc
  • Worminator front axle
  • rc4wd 55mm shocks
  • aluminum body, servo box & fender.